Electric kettles are common kitchen appliances in modern homes, used to boil water and make hot drinks such as coffee. However, due to long-term use and improper daily care, electric kettles will also have some common failures. The following will introduce several common electric kettle faults and repair methods:

1. Water leakage: Water leakage of electric kettle is one of the most common failures, the main reason is that the sealing rubber ring of the kettle itself is aging or damaged. The repair method is to disassemble the electric kettle and replace the new sealing rubber ring. When replacing the rubber ring, pay attention to choosing the appropriate size and material.

2. Can not be heated: If the electric kettle can not heat water or heating speed is slow, it may be the heating element inside the hot kettle is damaged. The repair method is to disassemble the electric kettle and check whether the electric heat pipe or heating plate is damaged or burned out. If a problem is found, the damaged parts should be replaced in time.

3. Switch failure: The switch of the electric kettle may fail after a long time of use. The repair method is to disassemble the kettle, clean the dust and dirt near the switch, and if it still does not work properly, the switch may need to be replaced.

4. Electric leakage: Electric kettle leakage is a serious failure that may lead to electric shock and fire hazard. If the electric kettle is found to leak electricity, it should be stopped immediately, and find a professional maintenance personnel to repair or replace. Usually, it is necessary to replace the safety switch for boiling water or repair the power line.

5. The kettle becomes dirty: After long-term use, the kettle will produce scale inside. The repair method is to disassemble the electric kettle, soak it with white vinegar or special scaling agent, and clean the inside of the kettle with a soft brush. Be careful not to immerse the electrical part in water to avoid damage.

6. Temperature control failure: Some electric kettles are equipped with temperature control function, but it may fail after long time use. The repair method is to find a professional maintenance personnel to check and repair, and may need to replace the temperature sensor or control panel.